Display panel×セキュリティハウス - メーカー・企業と製品の一覧

Access Call Display Board - Wandering Notification / Emergency Call AC-1RH

It identifies individuals and notifies them with a 7-segment LED digital display.

■7-segment digital display ■The access call transmitter's radio waves are received by the receiver (AC-1R/AC-8R/AC-8HM/AC-2HM/AC-2R), and the transmitter data is digitally displayed on the access call display board AC-1RH. It displays using the channel code (01 to 15) set in advance by the transmitter, allowing for the identification of the transmitter that emitted the radio waves. ■Individual output is possible Individual outputs of up to 15 channels can be obtained in accordance with the overall output, enabling various controls such as connecting to a nurse call system. ■Expandable up to 3 additional units (total of 4 units) 1. It has communication functionality, allowing for expansion to a maximum of 3 locations such as the duty room, office, or nurse center. 2. There is no distinction between the main panel and sub-panel, so the receiver (AC-1R/AC-8R/AC-8HM/AC-2HM/AC-2R) can be connected to any of the 4 locations. 3. Simultaneous display and linked reset are possible. ■Usable for various applications ● It is ideal for building systems for personal identification and behavior monitoring of wandering elderly individuals in facilities for the elderly or hospitals, as well as for emergency calls and diaper sensor systems. Additionally, it is possible to confirm the current location of nurses and staff.

企業：セキュリティハウス
価格：Other

Security Sensor Systems
Security devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

チャンネル表示盤　CHN-20(F)

20系統の信号入力をメロディー(チャイム)とフラッシュで表示し、 4カ所まで接続可能な表示盤です

■信号入力をフラッシュライト、メロディー(チャイム)でお知らせチャンネル表示盤は接続された機器からの信号が入力されると、チャイム音の鳴動とLEDにより表示しますので、接続機器の動作状態が一目で確認できます。入力は、a接、b接に設定できます。(全CH共通) ●報知音　報知音一覧参照(各チャンネル毎に設定可能) ●LED表示　OFF時:消灯、待機時:緑色点灯、入力時:赤色点滅 ■短時間モード時のLEDは、保持、非保持の選択ができます。 ■出力・表示モード切替機能本体の停止ボタンを押すまで連続出力する『保持モード』と、自動復旧する『短時間モード』(3秒、15秒、30秒)に切替できますので、システムに応じた設定が可能です。 ■20チャンネル個別入力各チャンネル毎に機能ON/OFFスイッチを装備してますので、必要な時に必要なチャンネルのみ運用が行えます。 ■リモート入力端子メイク入力で動作STOPします。各チャンネルおよびセット/リセット表示が消灯します。 ■外部供給電源 AC100V供給時DC12V・900mAの外部供給します。

企業：セキュリティハウス
価格：Other

Security Sensor Systems
Security devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Channel display panel for 1CH, CHN-1

Various inputs will be notified through chime sounds and LEDs. This is a display panel that can communicate with up to four units.

■ Signal input displayed by chime and LED When a signal is input from a connected device, it is indicated by a chime sound and LED. ● Input can be switched between a contact/b contact settings. ■ Output and display mode switching function There are two modes: 'Hold mode', which continuously outputs until the reset switch on the main unit is pressed, and '3-second mode', which outputs for 3 seconds and then automatically resets, allowing for settings according to the system. ■ Chime sounds and melodies selectable from various options Chime sounds can be selected from 6 types of chime sounds and 2 types of melodies. ● Ping pong / pipipipi / purupuru / pororon / ping pong pan pon / pi-po ● Always Dreaming / Seagull Sailor ■ Communication function allows for expansion up to 4 locations The display panel can be expanded to a maximum of 4 locations, making it suitable for large-scale systems. ● Operation and signal input can be performed from any of the display panels No.1 to No.4. ● Input can be received and set/reset from any CHN-1. ● Wiring between each display panel can be done with a 2-core wire, with a maximum wiring distance of 100m for each.

企業：セキュリティハウス
価格：Other

Security Sensor Systems
Security devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Security and Equipment Monitoring Display Panel EXC-500

Important security and equipment information can be monitored centrally with 5 circuit displays!

■Overview This is a 5-channel alarm display panel for centralized monitoring of water leak sensors EXL-SH12 and other equipment abnormal information. ■Simple and easily identifiable alarm display and sound The display panel is equipped with red LED indicators for each circuit, which light up during an alarm and blink during memory mode. Additionally, unique alarm sounds can be set for each circuit, allowing identification of the nature of the abnormality through sound. *All five circuits can be unified to a single alarm sound. *Volume can be adjusted (from silent to 80dB). ■Individual 'On/Off' settings for each circuit are possible! Each circuit is equipped with an On/Off switch, allowing for individual settings for each circuit, enabling operation with alert patterns suited to the situation! ■User-friendly alarm output and power supply for sensors The alarm output includes 1. a comprehensive output c contact, and 2. individual output c contacts for each circuit (5 in total), making it ideal for external information transmission and interlocking operation with external devices (such as automatic reporting devices, rotating lights, sirens, and solenoid valves). Additionally, a 500mA power supply for sensors is included, allowing for operation as a centralized monitoring panel with multiple installations of EXL-SH12 or EXL-CR1AD.

企業：セキュリティハウス
価格：Other

Security Sensor Systems
Security devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Life Sensor Display Panel SSH-5

This is a multifunction display panel for the life safety notification system.

■Features 1. Channel display panel function (immediately notifies and outputs when there is a contact input) 2. Life safety notification function (notifies and outputs when the set time exceeds) 3. Life sensor display panel function (connects to sensors with remote input function, and ON/OFF for each channel is linked to remote output. There is no individual output) Three functions are provided. ■Control each room with the main unit No need for an occupancy confirmation switch or card holder switch; control can be done with the main unit. ■Individual channel input Each channel can be operated with an ON/OFF switch, allowing operation only in the necessary rooms when needed. ■Signal input displayed with chime and LED When a signal is input from connected devices, a chime sound and LED display will occur, allowing the operational status of the connected devices to be confirmed visually and audibly.

企業：セキュリティハウス
価格：Other

Security Sensor Systems
Security devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Life Sensor Display Panel SSH-10

This is a multifunctional display panel for the life safety notification system.

■Features 1. Channel display panel function (immediately notifies and outputs when there is a contact input) 2. Life safety notification function (notifies and outputs when the set time exceeds) 3. Life sensor display panel function (connects to sensors with remote input function, and ON/OFF for each channel is linked to remote output. There is no individual output) Three functions are provided. ■Control each room with the main unit No need for an occupancy confirmation switch or card holder switch; control can be done with the main unit. ■Individual channel input Each channel can be operated with an ON/OFF switch, allowing operation only in the necessary rooms when needed. ■Signal input displayed with chime and LED When a signal is input from connected devices, a chime sound and LED display occur, allowing the operational status of connected devices to be confirmed visually and audibly.

企業：セキュリティハウス
価格：Other

Security Sensor Systems
Security devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Channel Display Panel CHT-4

This is a 4-channel display board that notifies with a flash and melody (chime).

■ Signal input is notified by flashlight and melody (chime) When a signal is input from a connected device, it will notify you with a flashlight and melody (chime). You can register alert sounds and set ON/OFF for each channel. ■ Output and display mode switching function You can switch between 'hold mode', which continuously outputs until the stop button on the main unit is pressed, and modes of 3 seconds, 6 seconds, 15 seconds, or 30 seconds, allowing for settings according to the system. ■ Chime and melody sounds selectable from various options There are 10 types of alert sounds combined with melodies, which can be registered arbitrarily from 1CH to 4CH. The alert (red LED blinking) will sound in conjunction. It will not sound when the volume is set to OFF.

企業：セキュリティハウス
価格：Other

Security Sensor Systems
Security devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Channel Display Panel CHN-5(F)

A display panel that shows the signal input from 5 systems with melodies (chimes) and flashes, capable of communicating with up to 4 locations.

■ Signal input is indicated by a flashlight and melody (chime). When a signal is input from the connected device, it will be indicated by a chime sound and LED, allowing you to confirm the operational status of the connected device visually and audibly. (a contact and b contact inputs can be selected) - Alert sound: Refer to the alert sound list (can be set for each channel) ■ 5-channel individual input Each channel is equipped with an ON/OFF switch, allowing operation only in necessary locations at necessary times. ■ LED display hold/non-hold The LED can display various indications based on settings. OFF: off / Standby: green light / Input: red blinking In short-time mode, the LED can be set to hold or non-hold. ■ Output/display mode switching function You can switch between 'hold mode', which continuously outputs until the main unit's stop button is pressed, and 'short-time mode', which automatically propagates (3 seconds, 150 seconds, 30 seconds), allowing settings according to the system. ■ Check function When there is an input in the reset state, it will turn red in conjunction, allowing for loop checking. (This is the same in the case of communication connection)

企業：セキュリティハウス
価格：Other

Security Sensor Systems
Security devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Channel Display Panel CHN-10(F)

Signal input from 10 systems displayed with melody (chime) and flash, with a display panel that can connect up to 4 locations.

■ Signal input is notified by flashlight and melody (chime). The channel display panel shows the input signal from the connected device with chime sounds and LED indicators, allowing for immediate confirmation of the operational status of the connected device. ● Alert sound: Refer to the alert sound list (configurable for each channel) ● LED display: OFF: Off, Standby: Green light, Input: Red blinking ■ In short-time mode, the LED can be set to either hold or non-hold. ■ Output and display mode switching function You can switch between 'hold mode', which continuously outputs until the stop button on the main unit is pressed, and 'short-time mode' (3 seconds, 15 seconds, 30 seconds), allowing for settings tailored to the system. ■ 10-channel individual input Each channel is equipped with an ON/OFF switch, enabling operation of only the necessary channels when needed. ■ Remote input terminal The operation stops with a make input. The display for each channel and set/reset will turn off. ■ External power supply Provides external power of DC 12V, 400mA when supplied with AC 100V.

企業：セキュリティハウス
価格：Other

Security Sensor Systems
Security devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Display panel×セキュリティハウス - メーカー・企業と製品の一覧

Display panelの製品一覧